Journal Title : International Journal of Modern Trends in Engineering and Science
Volume 03 Issue 03 2016
ISSN no: 2348-3121
Page no: 31-33
Abstract – Developing an intelligent system to overcome the problems of maintenance management and applying Neural network based fault diagnostics method for effectively identify the machine faults at an early stage using different quantities (Measures or Readings) such as current, voltage, temperature, and vibrations . By applying peltier based power generation from machines heat energy and generated power is stored in a rechargeable battery to deliver power for various loads. The electric energy demand will increase in the future, and the will to exploit larger amounts of generation from renewable resources requires the development of new strategies to manage a more complex electrical system.
Keywords— Single Induction Motor; Health monitoring; Fault Diagnosis; Zigbee Technology
- Maynard, K. P., and Trethewey, M., “Blade and Shaft Crack Detection Using Torsional Vibration Measurements, Part 1: Feasibility Studies,” Noise and Vibration Worldwide, December 2000, pp. 9-15.
- R.Belmans and K.Hameyer, “Different approaches to the preventive Maintenance of induction motors.*’ in ploc.lCEM’96, pp. 423428, 1996.
- M.E.H. Benbouzid, “A Review of Induction Motors Signature Analysis as a Medium for Faults Detection”, IEEE Transaction on Industry Electronics, vol. 47, no. 5, Oct., pp. 984-993, 2000.
- Vas,P.,Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines, Clarendon Press, Oxford,1993.
- A. Tsikalakis and N. Hatziargyriou, “Centralized control for optimizing microgrids operation,” IEEE Trans. Energy Convers., vol. 23, no. 1, 241–248, Mar. 2008.
- P. Siano (2014, Feb.). Demand response and smart grids, a survey. Renew.Sustainable Energy Rev. [Online]. 30, pp. 461–478.
- A. R. Di Fazio et al., “Integration of renewable energy sources, energy storage systems, and electrical vehicles with smart power distribution networks,” J. Ambient Intell. Humanized Comput., vol. 4, no. 6, pp. 663– 671, Dec. 2013.
- J. He, Y. W. Li, and F. Blaabjerg, “Flexible microgrid power quality enhancement using adaptive hybrid voltage and current controller,” IEEETrans. Ind. Electron., vol. 61, no. 6, pp. 2784–2794, Jun. 2014.
- F. Katiraei and M. Iravani, “Power management strategies for a microgrid with multiple distributed generation units,” IEEE Trans. Power Syst., vol. 21, no. 4, pp. 1821–1831, Nov. 2006.
- C. Chen, S. Duan, T. Cai, B. Liu, and G. Hu, “Smart energy management system for optimal microgrid economic operation,” IET Renew. PowerGen., vol. 5, no. 3, pp. 258–267, May 2011.
- P. Palensky and D. Dietrich, “Demand side management: Demand re-sponse, intelligent energy systems, and smart loads,” IEEE Trans. Ind.Informat., vol. 7, no. 3, pp. 381–388, Aug. 2011.
- Y. Zong, D. Kullmann, A. Thavlov, O. Gehrke, and H. Bindner, “Ap-plication of model predictive control for active load management in a distributed power system with high wind penetration,” IEEE Trans. SmartGrid, vol. 3, no. 2, pp. 1055–1062, Jun. 2012.
- C. Cecati, C. Citro, and P. Siano, “Combined operations of renewable energy systems and responsive demand in a smart grid,” IEEE Trans.Sustain. Energy, vol. 2, no. 4, pp. 468–476, Oct. 2011.
- A. Agnetis, G. de Pascale, P. Detti, and A. Vicino, “Load scheduling for household energy consumption optimization,” IEEE Trans. Smart Grid, vol. 4, no. 4, pp. 2364–2373, Dec. 2013.
- C. Cecati, C. Citro, A. Piccolo, and P. Siano, “Smart operation of wind turbines and diesel generators according to economic criteria,” IEEETrans. Ind. Electron., vol. 58, no. 10, pp. 4514–4525, Oct. 2011.