Journal Title : International Journal of Modern Trends in Engineering and Science
Volume 03 Issue 04 2016
ISSN no: 2348-3121
Page no: 79-83
Abstract – This paper presented simulation of incremental conductance (I.C) Maximum Power Point Tracking (MPPT) for in solar power systems with direct control method. The main difference of the proposed system to the existing system is to reduce conduction loss and the constant output current is obtained. The resultant system is capable of tracking the MPPs accurately and rapidly without steady-state oscillation, and also, its dynamic performance is satisfactory. The I.C algorithm is used to track the maximum from the solar array because it performs precise control under rapidly changing atmospheric conditions. A Cuk converter has to be designed for the DC/DC conversion process. It operates at discontinuous mode which is preferable for a wide operating range. This system could be used for battery charging. The power output from the photovoltaic system has the capacity to meet the household demands like electric cars, electric cycles, led lamps.
Keywords— DC-DC Power Conversion, Maximum Power Point Tracking, Cuk Converter, Solar Power
- “MPPT Controller for Photo-Voltaic Systems using Cuk DC/DC Convertor”- Neeraj Tiwari1, D. Bhagwan Das2.
- “Comprehensive approach to Modeling and Simulation of Photo-Voltaic Arrays”- M. G. Villalva, J. R. Gazoli, E. Ruppert.
- “Implementation of Incremental Conductance MPPT with Direct Control Method using Cuk Converter” DivyaTeja Reddy Challa1, I. Raghavendar
- “Development of a Microcontroller-Based Photovoltaic Maximum Power Point Tracking Control System” Eftichios Koutroulis, Kostas Kalaitzakis.
- “Incremental Conductance based Maximum Power Point Tracking (MPPT) for Photovoltaic System” M.Lokanadham, PG Student, K.VijayaBhaskar, Asst. Professor.
- “Comparison Study of Maximum Power Point Tracker Techniques for PV Systems” Hairul Nissah Zainudin, Saad Mekhilef.
- “Photovoltaic Converter Module Configurations for Maximum Power Point Operation” Katherine A. Kim and Philip T. Krein.
- “Simulation and Hardware Implementation of Incremental Conductance MPPT with Direct Control Method using Cuk Converter”, Azadeh Safari and Saad Mekhilef.
- “MPPT Techniques for PV Systems: Energetic and Cost Comparison”, R. Faranda, S. Leva, and V. Maugeri, Milano, Italy: Elect. Eng. Dept. Politecnico di Milano.
- “Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques”, T. Esram and P. L. Chapman, IEEE Trans. Energy Convers.
- “Analysis and Improvement of Maximum Power Point Tracking Algorithm based on Incremental Conductance Method for Photovoltaic Array”, B. Liu, S. Duan, F. Liu, and P. Xu.
- “Improved MPPT Algorithms for Rapidly Changing Environmental Conditions”, D. Sera, T. Kerekes, R. Teodorescu, and F. Blaabjerg.
- “A Novel Maximum Power Point Tracking Technique for Solar Panels using a SEPIC or Cuk Converter”, Henry Shu-Hung Chung, Member, IEEE, K. K. Tse, Member, IEEE, S. Y. Ron Hui, Fellow, IEEE, C. M. Mok, and M. T. Ho.
- “Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques”- Trishan Esram.
- “Analysis and Improvement of Maximum Power Point Tracking Algorithm based on Incremental Conductance Method for Photovoltaic Array”, Bangyin Liu, Shanxu Duan, Fei Liu, and Pengwei Xu.